METAL AND STAINLESS STEEL CUTTING DISC 2 IN 1 DUKE ENERGY 7"

180 mm (7") cut-off wheel for angle grinders, designed to cut metal and stainless steel with the same wheel.

At 1.6 mm thick it offers greater cutting depth than a 4 1/2" wheel and runs at up to 8,600 RPM. It is certified to EN12413 and carries the MPA Tested, ISO 9001 and TÜV marks.

Specifications

• Diameter: 180 mm (7")
• Thickness: 1.6 mm (1/16")
• Center hole: 22.2 mm (7/8")
• Maximum speed: 8,600 RPM
• Material to cut: Metal and stainless steel
• Standard: EN12413 and z-14871
• Marks: MPA Tested, ISO 9001, TÜV
• Technology: German

Includes

• 1 cut-off wheel

Uses

• Cutting metal profiles, tube, rod and sheet
• Cutting stainless steel
• Ironwork and steel structures with a 7" angle grinder

Tips

• Use safety gear: goggles, hearing protection, mask, gloves and footwear.
• Mount the wheel with the grinder unplugged and make sure the machine's maximum speed does not exceed 8,600 RPM.
• Use the wheel only for cutting; do not use it on its side for grinding.
• Before using it, check that it has no cracks or dents.