PISTOLA DE AIRE CON MEDIDOR DIGITAL

Pneumatic gun for inflating tires from a compressor. It has a digital gauge with a backlit display that shows the pressure as you inflate, a rubber hose and a clip-on chuck that hooks onto the tire valve.

It connects to the compressor through a male quick connector at the base of the handle and is operated with a metal trigger, so you inflate and read the pressure without changing tools.

Specifications

• Gauge: Digital, LCD display with backlight
• Unit shown on display: kg/cm²
• Hose: Rubber, with metal ends
• Chuck: Clip-on, for tire valve
• Air inlet: Male quick connector at the base of the handle
• Operation: Metal trigger
• Body: Black handle with hanging hook

Includes

• Gun with digital gauge
• Hose with clip-on chuck

Uses

• Inflating tires from a compressor, with the pressure in view
• Checking tire pressure in shops, tire repair shops and service stations
• Setting the pressure to the vehicle manufacturer's specification

Tips

• Check the pressure with the tire cold so the reading is comparable with the one recommended by the vehicle manufacturer.
• Inflate in short bursts and check the reading between each; do not exceed the maximum pressure marked on the tire sidewall.
• Fasten the chuck securely on the valve before pulling the trigger so air does not escape.
• Disconnect the gun from the compressor when you finish and store it hanging, without kinking the hose.
• Replace the gauge batteries when the display looks faint, and do not get it wet.